1、 Introduction to Ozone Aeration Tower

Ozone mixing tower, also known as ozone touch mixing tank or ozone aeration tower, our factory specializes in producing ozone aeration towers. Its operating principle: Ozone enters the bottom of the oxidation tower through a pipeline, passes through an aerator, and emits another microbubble through a microporous aerator. During the rising process, the microbubbles fully dissolve ozone in water. Water is scattered from the top of the ozone tower and naturally flows away from the top of the ozone tower. Ensure sufficient mixing time between ozone and water. The sterilization effect is more thorough, and the top is equipped with exhaust emissions and overflow ports to ensure that residual ozone does not stay indoors. Affects the production of workers. The overflow port ensures that after the mixing tower is filled with water, the water will not flow back to the ozone generator and damage it.

2、 Operating principle of ozone aeration tower

Ozone mixing tower, also known as oxidation tower, is a commonly used sterilization equipment in water treatment systems. The sterilization effect is not only related to the type and quantity of bacteria in water and the content of ozone, but also to the contact time between ozone and water and the ozone gas distribution head. Generally speaking, the longer the contact time between ozone and water, the more abundant the mixing, and the better the ozone sterilization effect. The smaller the air holes on the gas distribution plate, the smaller the ozone is cut into bubbles, and the larger the contact area between ozone and water. Therefore, the mixing effect is very good and the sterilization effect is also very good.

3、 Advantages of Ozone Touch Tower

In order to provide sufficient mixing area and mixing time for ozone and water, we need to have sufficient mixing space. Usually, the mixing time of ozone is 5-10 minutes. Therefore, we need to plan the space of the ozone mixing tower based on the mixing time and flow rate. After determining the space of the ozone mixing tower, in order to promote convective mixing of ozone and water components, water enters while ozone enters. We plan the distance between the inlet and the inlet of ozone to be above 3500mm, so that ozone and water have sufficient mixing time and space to achieve the best sterilization effect.

Our company's planned ozone mixing tower usually uses 304 raw materials and 316L raw materials, and 2 stainless steel raw materials. The gas distribution plate uses titanium plate gas distribution plate (titanium plate aeration plate), and the titanium plate aeration plate has gas holes with a diameter of 5-20um. Ozone can be fully cut into small bubbles, which improves the sterilization effect of the ozone sterilizer.
Main uses of ozone mixing tower
1. Production of purified water, mineral water, mountain spring water, and beverage water
2. Sterilize and disinfect vegetables, fruits, and meat products to reduce pesticide residues;
3. Sterilize, disinfect, and preserve mineral water, purified water, medical water, and tap water;
4. Sterilize and disinfect feeding water to prevent and control aquatic diseases;
5. Sterilize and decolorize wastewater; Disinfection and purification of swimming pool water;




More content:Carnoy   www.kzyyl.com